Streamlining Inspection Process Using Systems Development Lifecycle (SDLC) Method in Developing Inspection App
DOI:
https://doi.org/10.33021/jie.v11i1.6952Kata Kunci:
Business Process, Cycle Time, Data Error, Inspection Process, Microsoft PowerApps, SDLCAbstrak
Company X, a toy car manufacturer, faced inefficiencies in its stamping inspection process, which involves 40 stamping machines. Inspections required over two hours per shift, with a 25% error rate in data entry—issues stemming from human factors and a manual data-entry method. To address these challenges, a PowerApps-based inspection application was developed using the SDLC (Software Development Life Cycle) methodology. Four phases are implemented: Planning, Analysis, Design, Implementation and Maintenance. This solution streamlined both the inspection process and data entry. The improvements reduced the time required for a single inspection from 1,466 seconds to 103 seconds (a 93% reduction) and eliminated data-entry errors entirely (0% error rate). The success of this implementation demonstrates the effectiveness of the SDLC methodology in enhancing the efficiency and accuracy of the inspection process at Company X.
Referensi
1. Bucaioni, A., Cicchetti, A., & Ciccozzi, F. (2022). Modelling in low-code development: A multi-vocal systematic review. Software and Systems Modeling, 21, 1959–1981. https://doi.org/10.1007/s10270-021-00964-0
2. Cunningham, R. (2017, May 5). Build offline apps with new PowerApps capabilities. Microsoft Power Platform Blog. https://www.microsoft.com/en-us/power-platform/blog/power-apps/build-offline-apps-with-new-powerapps-capabilities/
3. Dumas, M., La Rosa, M., Mendling, J., & Reijers, H. A. (2018). Fundamentals of business process management (2nd ed.). Springer. https://doi.org/10.1007/978-3-662-56509-4
4. Frank, A. G., Dalenogare, L. S., & Ayala, N. F. (2019). Industry 4.0 technologies: Implementation patterns in manufacturing companies. International Journal of Production Economics, 210, 15–26. https://doi.org/10.1016/j.ijpe.2019.01.004
5. ISO. (2019). ISO 9241-210:2019 Ergonomics of human-system interaction—Part 210: Human-centred design for interactive systems. International Organization for Standardization. https://www.iso.org/standard/77520.html
6. ISO/IEC. (2023). ISO/IEC 25010:2023 Systems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Product quality model. International Organization for Standardization. https://www.iso.org/standard/78176.html
7. ISO/IEC. (2024). ISO/IEC 25040:2024 Systems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Quality evaluation framework. International Organization for Standardization. https://www.iso.org/standard/83467.html
8. ISO/IEC/IEEE. (2017). ISO/IEC/IEEE 12207:2017 Systems and software engineering—Software life cycle processes. International Organization for Standardization. https://www.iso.org/standard/63712.html
9. ISO/IEC/IEEE. (2018). ISO/IEC/IEEE 29148:2018 Systems and software engineering—Life cycle processes—Requirements engineering. International Organization for Standardization. https://www.iso.org/standard/72089.html
10. Kendall, K. E., & Kendall, J. E. (2019). Systems analysis and design (10th ed.). Pearson.
11. Lindhorst, G. (2019, January 31). SaveData and LoadData unleashed. Microsoft Power Platform Blog. https://www.microsoft.com/en-us/power-platform/blog/power-apps/savedata-and-loaddata-unleashed/
12. Liu, C., Peng, G., Kong, Y., Li, S., & Chen, S. (2021). Data quality affecting big data analytics in smart factories: Research themes, issues and methods. Symmetry, 13(8), 1440. https://doi.org/10.3390/sym13081440
13. Sanchis, R., García-Perales, Ó., Fraile, F., & Poler, R. (2020). Low-code as enabler of digital transformation in manufacturing industry. Applied Sciences, 10(1), 12. https://doi.org/10.3390/app10010012
14. Sony, M., Antony, J., & Douglas, J. A. (2020). Essential ingredients for the implementation of Quality 4.0: A narrative review of literature and future directions for research. The TQM Journal, 32(4), 779–793. https://doi.org/10.1108/TQM-12-2019-0275
15. Tilley, S. (2020). Systems analysis and design (12th ed.). Cengage Learning.
16. Tortorella, G. L., & Fettermann, D. (2018). Implementation of Industry 4.0 and lean production in Brazilian manufacturing companies. International Journal of Production Research, 56(8), 2975–2987. https://doi.org/10.1080/00207543.2017.1391420
17. Valacich, J. S., & George, J. F. (2020). Modern systems analysis and design (9th ed., Global ed.). Pearson.
18. Verhoef, P. C., Broekhuizen, T., Bart, Y., Bhattacharya, A., Dong, J. Q., Fabian, N., & Haenlein, M. (2021). Digital transformation: A multidisciplinary reflection and research agenda. Journal of Business Research, 122, 889–901. https://doi.org/10.1016/j.jbusres.2019.09.022
19. Vial, G. (2019). Understanding digital transformation: A review and a research agenda. The Journal of Strategic Information Systems, 28(2), 118–144. https://doi.org/10.1016/j.jsis.2019.01.003
20. Zonnenshain, A., & Kenett, R. S. (2020). Quality 4.0—the challenging future of quality engineering. Quality Engineering, 32(4), 614–626. https://doi.org/10.1080/08982112.2019.1706744
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2026 Jan William Aristoteles Sienaya, Andira Taslim

Artikel ini berlisensi Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).




