Implementation of a PLC and HMI-Based Control System on a Prototype of Portable Plastic Injection Machine
DOI:
https://doi.org/10.33021/yw08qs75Abstrak
The portable plastic injection machine is one of the technological innovations in plastic production, adapted from industrial-scale injection molding machines to support laboratory-scale production or learning programs. Previous research has produced a prototype of a horizontal-type portable plastic injection machine with dimensions of 672.5×308×308 mm and a weight of 19.12 kg. However, the machine still has several issues. One of the main issues is the control system, which is based on a microcontroller and considered less reliable for long term automated operation. Additionally, the lack of operational efficiency is due to the absence of a clamping distance adjustment function, which currently can only be modified by changing the arduino program. The control system was improved by replacing the microcontroller-based system with a PLC-based system and adding several necessary functions. The development process included a study of the existing control system, followed by programming planning, component assembly, and software programming. After programming, the improved systems were tested. The test results show that switching to a PLC and HMI-based control system makes machine operation easier and more efficient. Additionally, the electrical system of the machine becomes simpler compared to the previous microcontroller-based control system.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2026 Imam Aldiansah Maulana, Muhammad Izhar Hasbi, Satrio Fajar Priantama, Budi Triyono

Artikel ini berlisensi Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).










