Effect of Blade Roughness on Laboratory Scale Pelton Turbine Efficiency
DOI:
https://doi.org/10.33021/6t656n93Abstract
Pelton turbines are widely used in high-head and low-flow hydropower systems because the kinetic energy of a water jet can be converted directly into runner torque. However, deterioration of the bucket surface can disturb the water sheet, increase local friction, and reduce momentum transfer. This study experimentally investigated the effect of controlled bucket surface roughness on the shaft power and efficiency of a laboratory scale Pelton turbine. Four roughness levels were prepared by polishing, graded sanding, light sand blasting, and heavy sand blasting, producing average Ra values of 0.8, 1.6, 3.2, and 6.3 micrometers, respectively. The tests were conducted on a single nozzle closed loop Pelton turbine rig at an effective head of 10.0 m and discharge of 5.45 L/s. Discharge, head, rotational speed, torque, and roughness were measured using calibrated instruments, and the uncertainty of efficiency was estimated using propagation of measurement errors. The results show that increasing roughness consistently reduced performance. The maximum shaft power decreased from 419.7 W at Ra = 0.8 micrometers to 314.9 W at Ra = 6.3 micrometers, while efficiency decreased from 78.5% to 58.9%. The combined relative uncertainty of efficiency was estimated at approximately 2.2%. The findings confirm that bucket surface finishing and roughness control are important for maintaining Pelton turbine performance in laboratory scale and small hydropower applications.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Baso Alauddin

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).










