Kajian Penerapan Life Cycle Persfective dengan Penerapan Reduce, Reuse, dan Recycle (3R) di Industri Berbahan Baku Logam dan Plastik Cikarang

Nida Mariam

Abstract


Abstract. Human needs are increasing day by day. To meet these needs, one of the things that should be done are produce these materials or needs, this is related to the manufacturing industry. One of these manufacture is the metal and plastic industry. The manufacturing industry is growing rapidly and is diverse, causing a large environmental effect or influence, if environmental management or control is not carried out. Objectives: One of the efforts that need to be done to protect the environment is conduct a Life Cycle Perfective (LCP) analysis related to the implementation of 3R (Reduce, Reuse, and Recycle). In this study, analyzing the Life Cycle Perspective through the application of the 3R in each production activity or production support. Method and results:This research is done by literature study, observation, and analizing this situation Conclusion: The benefits of this 3R application are felt by the industry, in addition to making production activities more effective and efficient, increasing customer trust, and becoming a culture in environmental protection and environmental prevention activities in the company as well as the actions of every employee. In the future, it will be improved and re-evaluated in accordance with existing production activities and continuous industrial enhancement.

Keywords


Life Cycle Perspective;3R; manufacture

References


​O. Soemarwoto (1997). Ekologi, lingkungan hidup, dan pembangunan. Bandung: Djambatan

​ Patil, Dr, and Y. Dilip (2012). Sustainable Development and Construction Industry. Google Scholar

​Prayitno, “Kajian Recycle, Reuse dan Recovery (3R) untuk Proses Produksi Kulit Wet Blue pada Industri Penyamakan Kulit,†Majalah Kulit, Karet, dan Plastik, vol. 25, no.1, 2009.

​M. Chaerul and V. Allia, « Kajian Recycle, Reuse dan Recovery (3R) untuk Proses Produksi Kulit Wet Blue pada Industri Penyamakan Kulit,†Majalah Kulit, Karet, dan Plastik, vol. 25, no.1, 2009.

​Helmi, H., Nengsih, Y., & Suganda, V. (2018). « Peningkatan kepedulian lingkungan melalui pembinaan penerapan sistem 3R (reduce, reuse, recycle) ». JPPM (Jurnal Pendidikan dan Pemberdayaan Masyarakat), 5(1), 1-8. doi:http://dx.doi.org/10.21831/jppm.v5i1.1686

​S. Sumiyati and M. Restuti Iriany, “Penerapan Recycle, Reuse dan Recovery (3R) Limbah Bahan Berbahaya dan Beracun secara Off-site PT Pengelolaan Limbah Industri Batam (PT PLB) Jakarta,†Jurnal Presipitasi : Media Komunikasi dan Pengembangan Teknik Lingkungan, vol. 4, no. 1, pp. 48-55, Mar. 2008.[7]​S. Madya (2007). Teori dan Praktik Penelitian Tindakan. Bandung: Alfabeta

​H. Jefferson, R. Dvorac, and E. Kosior (2009). « Plastics recycling: challenges and opportunities ». Philos Trans R Soc Lond B Biol Sci. 2009 Jul 27; 364(1526): 2115–2126. doi: 10.1098/rstb.2008.0311

​O. Soemarwoto (1997). Ekologi, lingkungan hidup, dan pembangunan. Bandung: Djambatan

​A. Dyah Radityaningrum, J. Caroline, D. Kusuma Restianty (2017). « Potensi Reduce, Reuse, Recycle (3R) Sampah pada Bank Sampah Bank Junk for Surabaya Clean (BJSC) ». Jukung Jurnal Teknik Lingkungan, 3( 1) :1-11 :2017.

​M. K. Mostafa and R. W. Peters (2017). »Applying the three R’s: Reduce, reuse, and recycle in the chemical industry ».Journal of the Air & Waste Management Association, 67:3, 322-329, DOI: 10.1080/10962247.2016.1234421

​ U. Aminu Umar, N. Shafiq, F. Amira Ahmad (2021).â€A case study on the effective implementation of the reuse and recycling of construction & demolition waste management practices in Malaysiaâ€. Ain Shams Engineering Journal, Volume 12, Issue 1,2021,Pages 283-291, ISSN 2090-4479,https://doi.org/10.1016/j.asej.2020.07.005.

​ H. Yuan (2013. â€Key indicators for assessing the effectiveness of waste management in construction projectsâ€.Ecol Ind, 24, pp. 476-484

​ N. Shafiq, C.S. Choo, M.H. Isa (2018). “Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete.â€Constr Build Mater, 187 (2018), pp. 178-184

​ M. Zahid, N. Shafiq, M.H. Isa, L. Gil (2018). â€Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology.†J Cleaner Prod, 194 (2018), pp. 483-498.

​ M. Zahid, N. Shafiq, A. Jalal (2018). “Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymerâ€. Constr Build Mater, 181 (2018), pp. 227-237

​ N. Shafiq, T. Ayub, S.U. Khan (2016).â€Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action.†Compos Struct, 153 (2016), pp. 30-41

​ T. Ayub, N. Shafiq, S. U, Khan (2016). “Compressive stress-strain behavior of HSFRC reinforced with basalt fibersâ€. J Mater Civil Eng. 2016;28(4):art. no. 06015014.

​R. Dwi Arisona (2018). « Pengelolaan Sampah 3R (Reduce, Reuse, Recycle) Pada Pembelajaran IPS untuk Menumbuhkan Karakter Peduli Lingkungan. ». Al Ulya: Jurnal Pendidikan Islam Volume 3 nomor 1, edisi Januari - Juni 2018

​F. Subekti (2017). « Implementasi Reduce, Reuse, Recycle (3R) dalam Menumbuhkan Kepedulian Anak Terhadap Lingkungan Di Paud Gajah Wong, Balerejo, Mujamuju, Umbulharjo, DIY. ». Jurnal Elektronik Mahasiswa Pend. Luar Sekolah. Vol 6, No. 6




DOI: http://dx.doi.org/10.33021/jenv.v7i2.1566

Copyright (c) 2022 Nida Mariam

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal of Environmental Engineering and Waste Management Published by PresUniv Press, in collaboration with IESA and APIK Indonesia Network
       Â