Pemilihan Konsentrasi Pengawet dan Kecepatan Rotasi Pengadukan terhadap Kualitas Produk Sirup Obat Asetaminofen “X†dengan Metode Desain Eksperimen
DOI:
https://doi.org/10.33021/jie.v2i1.392Abstract
PT XYZ is one of the pharmaceutical companies in Indonesia. There is a problem in the quality of the stability of formulation in acetaminophen syrup "X", which is the problem of product deposition. Experiment was conducted to see the effect of change of concentration of preservative or thickener to product quality and to know how big influence of speed of stirring to product quality. The method used is Design Of Experiment (DOE) with 2 factors: concentration of preservative or thickening and stirring speed to centrifugation and viscosity response; and each factor has 3 levels, for concentration of preservative or thickeners level tested is 10%, 15% and 20% while for stirring the level tested is 200 RPM, 300 RPM, and 400 RPM. The test is a laboratory scale test and collected data then analyzed using full random design method and then calculated statistically using two-factor analysis of variance method (ANOVA) to see the effect between concentration of preservative or thickening and speed of stirring to syrup deposition. The best combination obtained is a preservative or thickening concentration of 20% and 300 RPM speed of
stirring.
References
Chandra ,Budiman.(2010). Metode penelitian kesehatan, Jakarta: EGC.
Crosby, P.B. (1979), Quality is Free: The Art of Marketing Quality Certain, New York: McGraw-Hill.
Erizal. (2010). Sintesis dan Karakteristik Hidrogel Superabsorben Poliakrilamida (PAAM) Berikatan Silang – Karaginan Hasil Iradiasi Gamma. Jakarta: Indonesian Journal Chemistry.
Montgomory, C. Douglas. (1996). Statistical Quality Control (6th ed). Asia: John Wiley&Sons.
Zulfikar. (2008). Kimia Kesehatan. Jilid 3. Departemen Pendidikan Nasional, Jakarta.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).




