Perancangan Alat Bantu Praktik Arm Robot pada Penggunaan Teaching Pendant dengan pendekatan Value Engineering

Authors

  • M Yani Syafei President University
  • Clara Eunike Wahyuningsih President University

DOI:

https://doi.org/10.33021/jie.v4i2.893

Abstract

Controlling robot use a Teaching Pendant to communicate between users and arm robot. Teaching Pendant has a weight of about 1,250 kg. Left hand is used to handle teh Teaching Pendant and the on/off of motor o the arm robot. And the right hand is used as an operator in pressing the drive button in the Teaching Pendant. The position of users is stand when practicing controlling robot. The user feels some of the pain in the left hand, right hand and waist when using the Teaching Pendant. Based on the problem, I propose for tool to hold the Teaching Pendant. The method that use is the Value Engineering approach, making FAST diagrams for determining the function of the tools, and Nordic Body map to obtain the real data of pain. Respondent are users of Teaching Pendant. The result was 67,98% feel the pain because using the Teaching Pendant. The function of the tool that has been made is to hold the Teaching Pendant, using hollow iron for the materials. Tool testing was carried out with the same respondents, and they must fill the Nordic Body Map after they used the tool. The result of using this tool are able to reduce the total pain by 36,36% from the total pain in the beginning.

Author Biographies

M Yani Syafei, President University

Industrial Engineering Department

Clara Eunike Wahyuningsih, President University

Industrial Engineering Department

References

Budiharto, Widodo. (2014). Robotika Modern Teori & Implementasi (Edisi Revisi). Andi Offset. Yogyakarta.

Kusmana, Wowo Sunaryo. (2014). Ergonomi dan K3 Kesehatan Keselamatan Kerja. PT Remaja Rosdakarya. Bandung.

Melfa. (2013). Mitsubishi Industrial Robot R56TB Instruction Manual. Mitsubishi.

Syafei, Yani M.; Sumerli, Chevy Herli, dan Susilowati, Etty. (2018). Konsep Ergonomi Dalam Desain Produk. Alfabeta. Bandung.

Younker, Del L. (2003). Value Engineering Analysis and Methodology. Marcel vc Dekker Inc.

Downloads

Published

11-12-2019

Issue

Vol. 4 No. 2 (2019)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).