IDENTIFIKASI KONDISI DAN POTENSI SUMUR BERDASARKAN DATA PTS SUMUR X
DOI:
https://doi.org/10.33021/jmem.v2i02.326Abstract
Wells X has decreased the pressure inside the well. The thing that needs to be done on the well to determine the cause of the pressure drop is by doing Pressure, Temperature, Spinner Survey (PTS Survey) test when the well is flowing (PTS flowing) and when the well is closed (PTS shut-in). PTS flowing is done with the aim of determining the depth and contribution of feedzone, as well as determining the potential of generating electricity wells. PTS shut-in is done to determine the outflow phenomenon and determine the conditions in the wellbore. Data obtained by PTS survey are pressure, temperature, spinner speed, and cable speed. Data acquired by the PTS tool during PTS flowing and then processed, obtained that well X has three feedzone zones, ie feedzone 1 at 1084-1164 mKU depth, feedzone 2 at depth 1168-1392 mKU, and feedzone 3 at 1532 depth -1564 mKU. The contribution given by each feedzone was 6.2 kg / s at feedzone 1, 2 kg / s at feedzone 2, and 1.9 kg / s in feedzone 3. With a total mass of 10.1 kg / s of steam and power plant of 8 ton / hr / mw, well X has an energy potential of 4.55 MWe.
Keywords: Pressure Temperature Spinner, Feedzone Contribution, Superheat, Condition of Wells, Reservoir Conditions
References
Axelsson, Gudni; Benedikt Steingrimsson. 2012. Logging, Testing, and Monitoring Geothermal Wells, United Nations University, Reykjavik.
Buscato, Norman, 2012, Quantifying Feed Zone Contributions From Pressure-Temperature-Spinner Data and Pressure Transient Analysis Using Welltester, United Nations University, Reykjavik.
Grant, Malcolm; David Wilson, Paul Bixley, 2006, Spinner Data Analysis To Estimate Wellbore Size and Fluid Velocity, NZ Geothermal Workshop.
Hole, Hagen, 2008, Geothermal Well Completion Tests, Petroleum Engineering Summer School, Auckland.
Humaedi, Muhammad Tamrin et al, 2016, A Comprehensive Well Testing Implementation during Exploration Phase in Rantau Dedap Indonesia, Workshop on Geothermal Engineering, Jakarta.
Saptadji, Nenny,;Janitra Halim, Jantiur Situmorang, 2011, Analisis Pressure Temperature Spinner (PTS) Survey Pada Sumur Panas Bumi Satu Fasa Uap, Institut Teknologi Bandung, Bandung.
Sisler, John et al, 2015, Improving the Performance of Geothermal Pressure Temperature Spinner (PTS) Tools used in Downhole Measurement, World Geothermal Congress
Steingrimsson, Benedikt, 2013, Geothermal Well Logging: Temperature And Pressure Logs, United Nations University
Stevens, Lynell, 2000, Pressure Temperature and Flow Logging in Geothermal Wells, Century Drilling & Energy Services Limited, Wairakei
Sunio, Eugene et al, 2015, Downflows in Wells at the Mak-Ban Geothermal Field Phillipines, World Geothermal Congress, Makati City.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
