Penerapan Reverse Engineering pada Analisa Tegangan Bracket Engine Mounting
DOI:
https://doi.org/10.33021/jmem.v1i01.33Abstract
Abstract. The objective of reverse engineering process in the manufacturing field is to reproduce or re-create an existing model. There are three stages in the research process: data acquisition, 3D modeling and design analysis. The results of the data capture acquisition form 3D products in .stl format. From this data is making 3D models, the level of deviation from the geometry created showing the quality of the results of the 3D bracket. The deviation was -0.8 mm in cross section runner. Geometry 3D design bracket and then analyzed using the finite element method software. For material testing bracket using the spectrometer, the type of material is aluminum AC4CH. The results of stress analysis testing in the bracket indicates there is high stress concentration at the center of the bracket. It demonstrates that the bracket will crack with the application of F 44.1 kN.
Keywords. Reverse Engineering, Bracket Engine Mounting, 3D Model, CAE, CAM.
References
Daftar Pustaka
Bagci, E. Reverse Engineering Applications for Recovery of Broken or Worn Parts and Re-manufacturing: Three case studies. Advances in Engineering Software, v. 40, p. 407-418, 2009.
Urbanic.R.J.dkk. “A Reverse Engineering Methodology For Rotary Components From Point Cloud Data.” University of Wisdor. Canada, 2008.
Vinesh Raja, and Kiran J. Fernandes.Reverse Engineering An Indutrial Perspective. UK: Springer Science + Business Media, 2008.
Kumar, A., Jain, P.K. & Pathak, P.M. Reverse Engineering in Product Manufacturing: An Overview, Chapter39.Vienna : DAAAM International Scientific Book, 2013.
https://id.m.wikipedia.org/wiki/CAD. Diakses tanggal 14 Mei 2015.
Laintarawan, I Putu, I Nyoman Suta Widnyana dan I Wayan Artana. Elemen Hingga . Denpasar : Universitas Hindu Indonesia, 2009.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
