Rancang Bangun Alat Uji Drop Weight Impact Skala Laboratorium

Authors

  • Kokok Tri Budianto Universitas Presiden
  • Anggun Rizka Maudina Universitas Presiden
  • Askar Triwiyanto Universitas Presiden

DOI:

https://doi.org/10.33021/jmem.v2i01.316

Abstract

The impact test is a test to measure the material's durabilityagainst shock loads. The impact test simulates the operating conditions of that materialoften found where the load does not always occur slowly but rathercame suddenly. The impact test instrument to be designed in this studyis a Drop Weight Tester (DWT) tool. This impact test apparatus utilizes massobjects and gravitational forces. Design of Drop Weight Tester (DWT) tool, designthe design refers to the ASTM D-5420-04 standard. In this study the designthe impact test apparatus analyzed the strength of the connection as well as the construction deflection forensure design results can be made. On testing Drop Weight Tester, objectsthe test is given a shock load with certain criteria such as altitude, load, dimensionpunch component striker as well as specimen thickness. At the same time it is doneobservation and data collection of the energy absorbed during the test.Specimen used is SPCC and Zincalume material with thicknessdifferent.

Author Biographies

Kokok Tri Budianto, Universitas Presiden

Program Sarjana Teknik Mesin

Anggun Rizka Maudina, Universitas Presiden

Program Sarjana Teknik Mesin

Askar Triwiyanto, Universitas Presiden

Universitas Presiden

References

Riduwan, Metode dan Teknik Menyusun Tesis, Alfabeta, Bandung, 2004.

Yuwono, Akhmad Herman., Buku Panduan Praktikum Karakteristik Material 1 Pengujian Merusak (Destructive testing), Departemen Metalurgi dan Material Fakultas Teknik Universitas Indonesia. Jakarta, 2009.

Seangatith, Sittichai, Study on Impact Responses of Pultruded GFRP, Steel and Aluminum Beams by Using DropWeight Impact Test, Suranaree University of Technology, Thailand, 2008.

Popov, E.P. and translator : Zaenal Astamar, Mekanika Teknik , Edisi Kedua, Jakarta : Erlangga, 1996.

Shackelford, J., F., Introduction to Materials Science for Engineers, Macmillan Publishing Company, New York, 1992.

Zemansky, Sears, FISIKA untuk Universitas 1 Mekanika, Panas, Bunyi. Jakarta: Binacipta, 1962.

Alfred, R. Lateiner, Teknik Memimpin Pegawai dan Pekerja. Terjemahan Imam Soedjono. Jakarta : Aksara Baru,1983.

http://beyond-steel.blogspot.co.id

http://www.amesweb.info/Default.aspx

American Society for Testing and Material (ASTM) D 5420-04.

Putranto, Benny, Perancangan Alat Uji Impak Charpy untuk Material Komposit Berpenguat Serat Alam, Teknik Industri, Universitas Sebelas Maret, Surakarta, 2011.

Downloads

Published

2018-01-25

Issue

Vol. 2 No. 01 (2017): Journal of Mechanical Engineering and Mechatronics

Section

Articles

License

Authors who publish with this journal agree to the following terms:
  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).