Perancangan Kapasitas Produksi Produk Electronic Control Unit (Ecu)

Oktavia Sunny, Anastasia Lidya Maukar, Ineu Widaningsih Sosodoro

Abstract


The export demand for Electoric Control Unit (ECU) products, which continued to increase by approximately 25% in December 2014, made the company have to review its production capacity. Based on current production capacity data, it is known that the process cycle time is 64.9 seconds while the takt time needed to meet consumer demand is 39.4 seconds for the first production line. With working time included in working hours overtime, this first-line capacity cannot meet production demands. Work measurement is done to get actual time data for capacity calculation. Man machine chart is one of the tools used to determine the production line capacity with the current number of machines and workers. To be able to fulfill the production demand, a capacity design with 2 proposed improvements is carried out, namely: adding a working time of one shift for the first production line or balancing work time between lines. By calculating the results obtained and the costs incurred, the proposal for balancing work time between lines becomes more effective to do.

Full Text:

PDF

References


Aarabi, M, and Hasanian, S., 2014. Capacity planning and control: a review. International Journal of Scientific & Engineering Research, Volume 5, Issue 8, pp. 975-984.

Freivalds, A. 2008. Niebel’s Methods, Standards, and Work Design. 12th Edition. New York: McGrow-Hill.

Wignjosoebroto, S., 2008. Ergonomi Studi Gerak dan Waktu – Teknik Analisis untuk Peningkatan Produktivitas Kerja Edisi Kedua, Surabaya: Guna Widya.

Rathod, A.S, Jadhav, R.G., and Babar, A.B., 2016. An Overview of Method Study and Study of Different Recording Techniques. International Journal of Science and Research, Vol. 5(8), pp. 1484-1491.

Sabadka, D., Molnár, V., Fedorko, G., and Jachowicz, T., 2017. Optimization of Production Processes Using the Yamazumi Method. Advances in Science and Technology Research Journal, Volume 11, Issue 4, pp. 175–182.




DOI: http://dx.doi.org/10.33021/jie.v4i1.748

Refbacks

  • There are currently no refbacks.



Articles in this journal have been indexed in major research databases, including:


 Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.