Penurunan Scrap Bead Ban (Blister bead) Di Area Curing Pada Produk Ban Roda Empat Dengan Konsep Siklus PDCA

Hery Hamdi Azwir; Ahmad` Sofyan; Athina Sakina Ratum

doi:10.33021/jie.v8i1.4323

Penurunan Scrap Bead Ban (Blister bead) Di Area Curing Pada Produk Ban Roda Empat Dengan Konsep Siklus PDCA

Hery Hamdi Azwir, Ahmad` Sofyan, Athina Sakina Ratum

Abstract

PT. A Tbk. is a company engaged in tire manufacturing, conditionally based on MTO or what is called make to order and MTS or called make to stock. The company has activities in producing tires for 2-wheeled vehicles (motorcycles), 4-wheeled (passenger sedans), or more. During the last 6 months (July to December 2020), the company's productivity has experienced problems, especially in the curing area caused by quality problems where tire product defects (blister bead) occur. Blister bead is a scrap in the curing area, where the scrap is in the form of air trapped in the tire bead which causes waste in the production. To overcome this, research was conducted using the PDCA method approach. The PDCA method is a continuous improvement process. This method carries out a systematic and continuous improvement process. The PDCA method has the advantage of taking corrective action and quality improvement once the root cause has been identified. Scrap blister bead in the period July to December 2020 is 0.095%. After making improvements to several factors, scrap blister bead decreased in the period January to April 2021, namely 0.021%. The scrap decline rate reached 0.78%.

Keywords

tire, waste, blister bead, kualitas, PDCA

Full Text:

PDF

References

Azwir, H. H., & Satriawan, H. (2018). Analisis Jam Kerja Efektif Dalam Upaya Peningkatan Produktivitas Tenaga Kerja Dengan Metode Pdca Di Pt Nmi. SPEKTRUM INDUSTRI, 16(1), 65. https://doi.org/10.12928/si.v16i1.9781

Azwir, H. H., & Setyanto, A. K. (2017). Analisis Penerapan Lean Manufacturing Pada Penurunan Cacat Feed Roll Menggunakan Metode PDCA (Studi Kasus PT. XYZ). Jurnal Rekayasa Sistem Industri, 6(2), 105. https://doi.org/10.26593/jrsi.v6i2.2714.105-118

Barsalou, M. A. (2015). Root Cause Analysis: A Step-By-Step Guide to Using the Right Tool at the Right Time. CRC Press.

Carrero Laura, Gomez Brayan, Velasquez Pablo, & Santis Angelica. (2021). Design of a Strategy for the Quality Management System in a Bricks Manufacturing Company in Colombia. Chemical Engineering Transactions, 86, 643–648. https://doi.org/10.3303/CET2186108

Kartika, H. (2020). Penerapan Lean Kaizen untuk Meningkatkan Produktivitas Line Painting pada Bagian Produksi Automotive dengan Metode PDCA. Jurnal Sistem Teknik Industri, 22(1), 22–32. https://doi.org/10.32734/jsti.v22i1.3251

Kotler, P., Kartajaya, H., & Setiawan, I. (2017). Marketing 4.0: Moving from traditional to digital. Wiley.

Lee N. Vanden Heuvel, Walter E. Hanson, Donald K. Lorenzo, James J. Rooney, Laura O. Jackson, & David A. Walker. (2008). Root cause analysis handbook: A guide to efficient and effective incident investigation (3rd ed.). ABS Consulting.

Montgomery, D. C. (2013). Introduction to statistical quality control (7th ed). Wiley.

Permana, H., Sulaiman, F., & Pramudita, M. (2021). Implementasi Metode Plan-Do-Check-Action (pdca) Tulta Untuk Pengolahan Limbah Industri Minuman Ringan. JURNAL INTEGRASI PROSES, 10(1), 10.

Salminen, E. (2021). Implementation of Clinical Trials Regulation EU no 536/2014 to Clinical Operations -organisation’s working procedures [Master’s Degree in Health Care]. Metropolia University of Applied Sciences.

Shibly, M., Alawamleh, H. A., Nawaiseh, K. A., Ali, B. J. A., Almasri, A., & Alshibly, E. (2021). The Relationship between Administrative Empowerment and Continuous Improvement: An Empirical Study. Revista Geintec, 11(2), 19.

Siregar, W. V., & Amin, M. N. G. (2021). Quality Control of Raw Materials on Red Snapper (Lutjanus sp.) Freezing Process in PT. Tridaya Jaya Manunggal Pasuruan East Java. Journal of Marine and Coastal Science, 10(2), 85. https://doi.org/10.20473/jmcs.v10i2.27660

Sundari, P., & Wella, W. (2021). SNI ISO/IEC 27001 dan Indeks KAMI: Manajemen Risiko PUSDATIN (PUPR). Ultima InfoSys : Jurnal Ilmu Sistem Informasi, 12(1), 35–42. https://doi.org/10.31937/si.v12i1.1701

Vongtum, L., Yupas, Y., Phosing, P., Kosonkittiumporn, S., & Kenaphoom, S. (2021). Service Innovation According to Public Policy of Local Government Organizations in the Northeast. Annals of R.S.C.B, 25(6), 7.

Wijaya, S., Supriadi, G., Debora, F., & Arliyanto, P. Y. D. (2021). Inhouse Quality Check System Improvement with Kanban System and Analysis Quality Control Circle. Operations Excellence: Journal of Applied Industrial Engineering, 13(1), 23. https://doi.org/10.22441/oe.2021.v13.i1.003

DOI: http://dx.doi.org/10.33021/jie.v8i1.4323

DOI (PDF): http://dx.doi.org/10.33021/jie.v8i1.4323.g1521