PENGARUH PENAMBAHAN Cu PADA CAIRAN Al Sn TERHADAP KEKERASAN LAPISAN INTERFACE KRUSIBEL BAJA

Andi Priyanto, Dody Prayitno

Abstract


Steel is often used as crucial in the world of metal casting. This study aims to determine the effect of aluminum alloy fluid on the hardness of the crucible steel interface. The method begins with melting aluminum, copper, and tin according to each variant with a temperature of 700oC, then stirring on the liquid for 15 minutes and holding it for 30 minutes. From this research it is concluded that the addition of Cu (10% and 20%) in Al-Sn-Cu fluid causes hardness value at the interface layer area but the increase is not very significant.

Full Text:

PDF

References


I Made Pasek Kimiartha, “ Pengaruh Penambahan tembagan (Cu) terhadap sifat mekanik dan struktur miko pada paduan aluminium silikon (Al-Si) melalui proses pengecoran”. Laporan Tugas Akhir, ITS, Surabaya, 2015.

J. G. Kaufman, E. L. Rooy, Aluminum Alloy Castings - Properties, Processes And Applications, 2004.

Dody Prayitno, Jurnal Penelitian dan Karya Ilmiah Lemlit USAKTI 01 (01), 2016.




DOI: http://dx.doi.org/10.33021/jmem.v2i02.325

Refbacks

  • There are currently no refbacks.


This work is licensed under a
Creative Commons Attribution-NonCommercial 4.0 International License